Consist of Traffic signal systems, preemption/priority equipment, DMS and CCTV's on municipal roads. EVP are used by fire, EMS and Police vehicles
| Functional Object | Description | User Defined |
|---|
| Roadway Advanced Rail Crossing | 'Roadway Advanced Rail Crossing' manages highway traffic at highway–rail intersections (HRIs) where operational requirements demand advanced features (e.g., where rail operational speeds are greater than 80 miles per hour). The active warning systems supported by this application include positive barrier systems which preclude entrance into the intersection when the barriers are activated. This application is activated on notification by wayside interface equipment which detects, or communicates with the approaching train. In this application, additional information about the arriving train is also provided by the wayside interface equipment so that the train's direction of travel, its estimated time of arrival, and the estimated duration of closure may be derived. This enhanced information may be conveyed to the driver prior to, or in context with, warning system activation. This application also includes detection capabilities which enable it to detect an entrapped or otherwise immobilized vehicle on the grade crossing and provide an immediate notification to the wayside interface equipment and traffic management. | False |
|---|
| Roadway Basic Surveillance | 'Roadway Basic Surveillance' monitors traffic conditions using fixed equipment such as loop detectors and CCTV cameras. | False |
|---|
| Roadway Data Collection | 'Roadway Data Collection' collects traffic, road, and environmental conditions information for use in transportation planning, research, and other off–line applications where data quality and completeness take precedence over real–time performance. It includes the sensors, supporting roadside infrastructure, and communications equipment that collects and transfers information to a center for archival. | False |
|---|
| Roadway Field Device Support | 'Roadway Field Device Support' monitors the operational status of field devices and detects and reports fault conditions. Consolidated operational status (device status, configuration, and fault information) are reported for resolution and repair. A local interface is provided to field personnel for local monitoring and diagnostics, supporting field maintenance, upgrade, repair, and replacement of field devices. | False |
|---|
| Roadway Field Management Station Operation | 'Roadway Field Management Station Operation' supports direct communications between field management stations and the local field equipment under their control. | False |
|---|
| Roadway Incident Detection | 'Roadway Incident Detection' provides incident detection using traffic detectors and surveillance equipment. It monitors for unusual traffic conditions that may indicate an incident or processes surveillance images, watching for potential incidents. It provides potential incident information as well as traffic flow and images to the center for processing and presentation to traffic operations personnel. | False |
|---|
| Roadway Signal Control | 'Roadway Signal Control' includes the field elements that monitor and control signalized intersections. It includes the traffic signal controllers, detectors, conflict monitors, signal heads, and other ancillary equipment that supports traffic signal control. It also includes field masters, and equipment that supports communications with a central monitoring and/or control system, as applicable. The communications link supports upload and download of signal timings and other parameters and reporting of current intersection status. It represents the field equipment used in all levels of traffic signal control from basic actuated systems that operate on fixed timing plans through adaptive systems. It also supports all signalized intersection configurations, including those that accommodate pedestrians. In advanced, future implementations, environmental data may be monitored and used to support dilemma zone processing and other aspects of signal control that are sensitive to local environmental conditions. | False |
|---|
| Roadway Signal Preemption | 'Roadway Signal Preemption' includes the field elements that receive signal preemption requests from emergency vehicles approaching a signalized intersection and overrides the current operation of the traffic signals to stop conflicting traffic and grant right–of–way to the approaching vehicle. | False |
|---|
| Roadway Speed Monitoring and Warning | 'Roadway Speed Monitoring and Warning' includes the field elements that monitor vehicle speeds. If the speed is determined to be excessive, an advisory or warning is displayed. Current environmental conditions and other factors that may reduce safe operating speeds may also be taken into account. The operational status (state of the device, configuration, and fault data) is provided to the center. This application can also provide an enforcement function, reporting speed violations to an enforcement agency. | False |
|---|
| Roadway Standard Rail Crossing | 'Roadway Standard Rail Crossing' manages highway traffic at highway–rail intersections (HRIs) where operational requirements do not dictate advanced features (e.g., where rail operational speeds are less than 80 miles per hour). Either passive (e.g., the crossbuck sign) or active warning systems (e.g., flashing lights and gates) are supported depending on the specific requirements for each intersection. These traditional HRI warning systems may also be augmented with other standard traffic management devices. The warning systems are activated on notification of an approaching train by interfaced wayside equipment. The equipment at the HRI may also be interconnected with adjacent signalized intersections so that local control can be adapted to highway–rail intersection activities. Health monitoring of the HRI equipment and interfaces is performed; detected abnormalities are reported through interfaces to the wayside interface equipment and the Traffic Management Center. | False |
|---|
| Roadway Traffic Information Dissemination | 'Roadway Traffic Information Dissemination' includes field elements that provide information to drivers, including dynamic message signs and highway advisory radios. | False |
|---|
| Roadway Work Zone Traffic Control | 'Roadway Work Zone Traffic Control' controls traffic in areas of the roadway where maintenance and construction activities are underway, monitoring and controlling traffic using field equipment such as CCTV cameras, dynamic messages signs, and gates/barriers. Work zone speeds and delays are provided to the motorist prior to the work zones. | False |
|---|
| SDO | Document # | Title | User Defined |
|---|
| ITE | ITE ATC 5201 | Advanced Transportation Controller (ATC) | False |
|---|
| ITE ATC 5202 | Model 2070 Controller Standard | False |
| ITE ATC API | Application Programming Interface (API) Standard for the Advanced Transportation Controller (ATC) | False |
| ITE ITS Cabinet | ITS Standard Specification for Roadside Cabinets | False |
| NEMA | NEMA TS 2 | Traffic Controller Assemblies with NTCIP Requirements | False |
|---|
| NEMA TS 4 | Hardware Standards for Dynamic Message Signs (DMS) with NTCIP Requirements | False |
| NEMA TS 5 | Portable Traffic Signal Systems (PTSS) Standard Control Circuit and Pilot Devices | False |
| NEMA TS 8 | Cyber and Physical Security for Intelligent Transportation Systems (ITS) | False |